Inside a consumer unit with every cable cut to length and dressed

Consumer units

Fuse box upgrades in Taunton.Old fuse boxes upgraded to modern RCBO consumer units with surge protection.

Your consumer unit (fuse box) is the heart of your home's electrical system, distributing power safely to every room. Upgrading to a modern consumer unit is one of the most important safety investments you can make for your property.

5.0 on Google

from 7 reviews

NAPIT Registered

Part P

10+ years

in the trade

ECS Gold Card

approved

NVQ Level 3

qualified

18th Edition

certified

EV Charging

certified

Inspection and Testing

certified

Why upgrade

Is it time for a new fuse box?

Why a modern upgrade keeps you safer

Instant safety cut-off
Modern units detect electrical faults and cut the power in a fraction of a second. Older fuse boxes often fail to trip fast enough, increasing the risk of fire or shock.
Individual RCBO protection
I install advanced RCBOs (Residual Current Circuit Breakers with Overcurrent protection), so each circuit has its own dedicated protection. If a fault occurs in your kitchen, only the kitchen turns off. The rest of your home stays up and running.
No more split-load blackouts
Older split-load boards group circuits together, so one minor fault can take down half the power in your house. A modern upgrade completely eliminates this frustrating issue.
Complete earth fault protection
Many older boxes entirely lack the vital earth fault protection required by modern safety standards to protect your family and appliances.

Signs your fuse box needs replacing

If your current setup has any of the following, your home may not be fully protected to modern safety standards.

Wooden backing
The box is mounted on wood or has an outdated wooden frame, a major fire hazard.
Rewirable fuses
You still have to replace pieces of fuse wire by hand when a fuse blows.
Plastic enclosure
Your fuse box has a plastic casing rather than a modern, fire-retardant metal enclosure.
Split-load circuit boards
Your board groups several rooms onto a single safety switch. If a minor fault happens in one room, it instantly plunges half your house into darkness.
Unable to add new circuits
If you're planning an extension or installing an EV charger, regulations prevent new circuits being connected to older boards.
Outdated or missing safety protection
No RCD protection (the safety switch that cuts the power if electricity leaks to earth), outdated "Type AC" RCDs, or no surge protection devices (SPDs) leave your appliances open to sudden voltage spikes and put your safety at risk.
Flagged on a safety check
An electrical safety check (EICR) has flagged it.
Buying or selling
You're buying or selling, and the survey mentioned it.

What you get

  • A new consumer unit, fitted and tested.
  • Every circuit labelled, so you know what's what.
  • A certificate for your records.

Complete 12-month coverage

All services are backed by a comprehensive 12-month guarantee. This covers both workmanship and all supplied materials. If anything goes wrong, I will take care of it at no extra cost.

My pre-board safety and testing process

Before I upgrade your fuse box, I thoroughly test your property's existing circuits. Connecting a modern consumer unit to old, unchecked wiring can cause sensitive new switches to trip.

My diagnostic tests check that your existing cables, earth connections, and main gas and water bonding are healthy, safe and up to regulations before your new board goes live.

Pre-board testing summary
What I checkWhy I do it
Earthing and bonding. Main earth connections, and gas and water pipe bonding.Makes sure your pipework is safely earthed, to prevent severe shocks.
Continuity. Unbroken paths on socket rings and earth wires.Makes sure the safety paths are intact, so fuses blow instantly during a fault.
Insulation resistance. The condition of hidden cables, and any wear in the wiring.Stops your new consumer unit tripping as soon as it is fitted.
Inside a new consumer unit, every cable dressed and looped neatly to its breaker

Consumer units

Inside my boards

Most people never see inside a consumer unit. Inside mine, circuits are arranged neatly and every circuit is labelled clearly.

How I work

Every job, done the same way.

Lance has completed two jobs for us over the past 12 months. Both jobs completed to a very high standard, his attention to detail is incredible.
Simon R. on Google
Read the reviews on Google
Free, no-obligation quotes
Get a fixed, upfront price before any work begins.
Transparent pricing
Know the cost upfront, with zero hidden fees.
Clean and respectful working
Dust sheets used where required, active dust extraction, and the working area vacuumed before I leave.
Tested and certified
All compliant work tested, signed off and certified for your records.
12-month guarantee
On all workmanship and supplied materials. If an issue arises, I will resolve it.

Areas I cover

Fuse box upgrades across the area

I provide consumer unit upgrades across Taunton and surrounding areas.

Areas covered

  1. TauntonHome
  2. Staplegrove1.5 miles
  3. Norton Fitzwarren2.2 miles
  4. Monkton Heathfield2.4 miles
  5. Ruishton2.6 miles
  6. Creech St Michael2.9 miles
  7. Kingston St Mary3.2 miles
  8. West Monkton3.2 miles
  9. Cotford St Luke4 miles
  10. Bishops Lydeard4.7 miles
  11. Hatch Beauchamp5.2 miles
  12. Wellington6 miles
  13. North Petherton6.6 miles
  14. Milverton6.6 miles
  15. Stoke St Gregory7.6 miles
  16. Bridgwater8.9 miles
  17. Wiveliscombe9.2 miles
  18. Cannington9.4 miles
  19. Nether Stowey9.7 miles
  20. Wembdon10.1 miles
  21. Curry Rivel10.2 miles
  22. Ilminster10.4 miles
  23. Westonzoyland10.4 miles
  24. Stogursey11.5 miles
  25. Chard11.6 miles
  26. Langport12 miles
  27. Puriton12.2 miles
  28. Uffculme12.3 miles
  29. South Petherton13.6 miles
  30. Williton14.2 miles
  31. Martock14.9 miles
  32. Highbridge15.2 miles

Not on the list? Ask. If it's within reach, I'll come.

Free quotes

Get a free quote.

Call me on 07312 115918, message me on WhatsApp, or email [email protected].